Wall ovens are heavy, tightly toleranced and unforgiving of a cabinet that is an eighth of an inch out. We check the opening before anything gets lifted.
Wall Ovens
A double wall oven can weigh over 300 pounds and has to land square in an opening built to the manufacturer's rough-in. We confirm the width, height, depth and the position of the junction box before the appliance is lifted into place.
The oven is then secured to the cabinet at its designated screw points, the door is aligned so the gaps are even, and we run a full heat cycle and check the door seal before handing it over.
What Sets Us Apart
Width, height, depth and cutout squareness confirmed against the rough-in before the lift.
We check the cabinet can carry the load and add support where a stacked double oven needs it.
Wall ovens hard-wired or plugged to the right circuit, with the junction box left accessible.
Bake and broil are run, the door seal is checked, and the clock and controls are set with you.
Our Process
We confirm the cabinet cutout and the electrical rough-in match the model's requirements.
The oven is lifted onto a platform, walked into the opening, and squared in the cabinet.
Fastened at its screw points and connected to the correct dedicated circuit.
Door reveals are evened up, a heat cycle is run, and the controls are demonstrated.
Brands We Install
Brand names and logos are the property of their respective owners and are shown to indicate the appliances we install. Bay Area Appliance Installation is an independent installer and is not an authorized dealer or agent of these manufacturers.
FAQs
Often it can, but oven dimensions vary a lot between brands. Send us your new model number and a photo of the opening and we will confirm.
Yes. Most single ovens need a 30 amp 240V circuit and doubles need more. We verify the existing circuit during the site check.
Yes. Stacked combinations are standard work for us, including the cabinet support and the separate circuits they usually need.
Related Services
Google Reviews from real Bay Area Appliance customers
We had a full Sub-Zero and Wolf package going into a new kitchen in Palo Alto and I was dreading install week. These guys measured everything two weeks before delivery, told our cabinet maker about a half inch problem with the refrigerator opening, and it got fixed before the appliances even shipped. Install day took one afternoon and everything worked. Genuinely the smoothest part of the entire remodel.
Hood install in a Berkeley Craftsman where the duct route was genuinely awkward. They ran rigid duct instead of the flex the previous quote wanted to use, and the difference in noise and airflow is enormous. It actually pulls steam now.
Full outdoor BBQ island in Novato. Grill, side burner, outdoor fridge and access doors. They pointed out the island was missing its vent panels and cut them in before setting the grill. That is a safety thing our contractor had missed entirely.
Wine column in Santa Rosa. Levelled it in both directions, ran both zones to temperature and told us to wait twelve hours before loading bottles. That kind of advice is why I would use them again.
Replaced a 20 year old cooktop with an induction unit and needed the electrical checked first. They looked at the panel, told me exactly what circuit I needed, and came back after the electrician finished. No upselling, no drama. The cutout was perfect and they cleaned the counter before leaving.
Washer and dryer install in Walnut Creek. They pulled the shipping bolts, levelled it properly and ran a spin cycle to prove it. Our old machine used to walk across the laundry room. This one has not moved an inch in four months.
Panel-ready dishwasher in Burlingame. The reveals match the cabinets exactly, which sounds like a small thing until you have seen one installed badly. They also ran a full cycle and watched the connections before signing off.
Double wall ovens into a stacked cabinet in Fremont. They checked the cabinet could take the weight and added support before lifting anything. The doors line up perfectly and it runs true to temperature.
Third floor condo in San Francisco with a freight elevator window of two hours. They handled the building paperwork, showed up early, and had the refrigerator in and running with time to spare. If you live in a building with rules, these are the people you want.
Miele built-in coffee unit plumbed into our kitchen island in Cupertino. They left enough slack in the line that the machine slides out for descaling, which our previous installer had not done on the old one. Small detail, huge difference.
LP conversion on a Wolf range at a property in Napa off the gas main. They used the actual Wolf kit, adjusted every simmer screw, leak tested it and labelled the unit. Very thorough and clearly knew the appliance well.
Micro-hood replacement in San Mateo. They noticed the previous installer had never rotated the blower, so it had been recirculating into the kitchen for years instead of venting outside. Fixed in ten minutes. Night and day difference.
Where We Work
Ready When You Are
Send us the model number and your city and we'll come back with a firm price, usually the same business day. Pre-measurement site visits available before you order.
(510) 240-2560Tell us the appliance and the city and we'll come back with a firm price, usually the same business day.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
